Home > Hard Drive > How To Set Master Slave Sata Hard Drives

How To Set Master Slave Sata Hard Drives

Contents

See Recovering Grub when you make a Mistake - Fedora on a second hard drive in the system. That means the connection is right. If it does not you will need to contact your system or motherboard manufactuer for assistance. You should be able to use the grub-install tool to do that. http://divxeo.com/hard-drive/master-slave-hard-drive-setup.html

Please Contact Us with any questions or issues with the jumper settings on this model drive. Multiple logical partitions can then be added to each extended partition (5-20). make sure you put the grub on /sda then boot should go like so: BIOS->GRUB on sda (first disk)->linux on sdb (second disk) BIOS->GRUB on sda -> windows on sda why I disconnected the USB drive and tried again.

How To Set Master Slave Sata Hard Drives

One may only boot an OS from a primary partition. If you are experiencing any issues during Windows installation, disable UDMA mode in the system BIOS. This allows the cable to select if the drive is master or slave based on the position on the cable. Command and Response Dialog of Adding a New IDE Drive: As root perform the following: (as highlighted in bold) [root]# fdisk /dev/hdb Command (m for help): m (Enter the letter "m"

Keep the drive in the protective anti-static container until ready to install. Unfortunately I have never needed to do this, so caveat user! Set the system BIOS to auto detect the drive with LBA mode enabled. How To Install A Second Sata Hard Drive In Windows 7 Look on the bottom right and you'll see something that looks like this picture.

I don't want to install Linux on my main hard drive, as I am afraid I might mess up my xyz operating system. Troubleshooting No hard drives show up: Do you have two drives on the cable? If you put the Linux drive in the master position on the cable, it maybe easier. http://www.pcadvisor.co.uk/how-to/pc-upgrades/how-slave-sata-drive-3461780/ How did you delete, or think you had deleted, the partition before your last attempt to install?

Does this mean that the system will only boot from the master? Difference Between Master And Slave Drive I was fingerprinted in Düsseldorf on exit. SATA drives represent the predominat and current technology. You will see some kind of stripe running down the side of the cable that will indicate pin 1.

Master Slave Hard Drive Setup

Continue with the installation of Windows 2000, as instructed by the installation program. Using Write Signature & Upgrade Wizard: Click Next on the first screen, and then select the drive you wish to install (in this case Disk 1). How To Set Master Slave Sata Hard Drives How to connect a sata drive as a slave and ide as a master Setting Ide HDD as master and Sata HDD as slave How do i install and have a Master Slave Hard Drive Jumper Settings In this scenario, you need to know what you are doing.

One can add more partitions using extended partitions. http://divxeo.com/hard-drive/internal-hard-drives.html I did once try to use a 40 conductor (new from CD) connector with my cable select and that caused issues. I guess I need to set one's jumper and make it master and another slave. matt_thumper New Member Hello, I have a Dell Dimension 4400 (BIOS A02) which I've upgraded over the years and it is now our secondary home computer and it's running RedHat Linux. What Is A Slave Hard Drive

All Rights Reserved. Important: Multiple partitions can be created during Windows installation, but the partitions that do not contain Windows cannot be formatted until Windows is completely installed on the hard drive. Note: When you see the message, No signature found on Disk 1, press YES. Check This Out The Write Signature & Upgrade Wizard displays.

If there is space left over and you would like to create another partition select Unpartitioned Space again and press the C button on your keyboard. Sata Master Slave To resolve this issue please download and install the latest Microsoft Service Pack. Fedora assumes that you are installing on a single hard drive on your machine.

Newer Than: Search this thread only Search this forum only Display results as threads Useful Searches Recent Posts More...

It's a point-to-point bus which can have just one device connected on each 'channel'. Insert the Windows 2000 CD into the CD-ROM drive and restart the system. Creating a primary partition: [root]$ fdisk /dev/sda n (add a new partition) p (new partition will be a primary partition. How To Install A Second Hard Drive Windows 10 The next screen shows the drive you have selected to write the signature to (if this is a new drive install only a signature will be written, making the drive a

The Windows system files and the boot.ini file is now your secondary hard drive. Western Digital highly recommends partitioning your drive in this manner. For more information about Primary Partitions, Extended Partitions, and Logical Drives please see Microsoft's Knowledge Base. this contact form But to select the boot device, you do that in BIOS in the Boot Priority Sequence section.Alternatively (and I'm guessing you do this) you can use a keyboard key just after

OK, I understand this, but if I change the boot order in the bios to my second drive (where the bootloader is), Fedora boots/does not, and the system just hangs when The MBR of the actual boot drive (primary master) still had the bootloader for Windows only. Convert ext2 to ext3, add volume label (-L), ... This may still occur even if you are installing a single drive.

Hard drive manufacturers use round figures for sizing (1000MB = 1GB instead of 2^40 bytes = 1GB) whereas operating systems show the exact version. Create the partition size you want by pressing C when prompted. No mention of the drive which I had intended to use. Input the capacity of the partition and click on the Apply button.

Different BIOSs may be configured differently, but the primary keystrokes used to enter the system BIOS are F1, F2 or Delete. Then, how can I change the boot records... Privacy Policy | License | Terms & Conditions | Uninstall | Resource | Data Recovery Solution | iPhone Recovery | Android Recovery current community blog chat Super User Meta Super User it's a more advanced boot manager. another option but i am not sure if this would work or if it realyl matters is maybe to create /boot partition on sda.

Options are l or p) Define sector or accept default (first free sector) Define last sector or sector size in (K)ilobyte (M)egabytes, (G)igabytes or accept default to use up the remaining Yes, my password is: Forgot your password? Insert the Windows 7 DVD into the DVD-ROM drive and restart the system. Standard 40-pin ATA interface cable or an 80-conductor cable if running UATA66/100 (max length: 18 inches).

The naming scheme will be as follows; hda = primary master drive hdb = primary slave hdc = secondary master hdd = secondary slave Remember, the drive order may not be Linux SCSI naming convention: /dev/sda, /dev/sdb, ... Example /etc/fstab entry with a UUID: UUID=7cb6e598-f639-488e-85c3-2a09d1440008 /share ext4 defaults 1 1 [Potential Pitfall]: If you get the following mkfs ext4 formatting error: mkfs.ext4: inode_size (128) * inodes_count (0) too big It complains that no bootable devices for both cases?

Special handling is required to protect hard drives from damage.