Home > Hard Drive > Dell R494d

Dell R494d

Contents

why would you think he would need a new mobo?? You may also... The specs for each board can be found on the Intel site. NOTE: If your replacement hard drive does not have the plastic guide bracket attached, remove the bracket from the old drive by unsnapping it from the drive. have a peek here

CAUTION: Despite having a plastic shield, the heat sink assembly may be very hot during normal operation. Lift the power supply up and out of the computer. maybe duct tape? Please add the address to your address book. http://www.techspot.com/community/topics/chassis-for-a-dimension-e310.48956/

Dell R494d

NOTICE: To avoid damage to the drive, do not set it on a hard surface. To guard against electrical shock, be sure to unplug your computer from its electrical outlet before installing any cards. Was this review helpful to you?YesNoReport abuse5.0 out of 5 starsWorks wellByNomadon February 28, 2013Verified PurchaseProduct works as expected, great for holding onto hard drive. Removing the Processor Follow the procedures in "Before You Begin." NOTE: To loosen the two captive screws on each side of the heat sink and fan shroud assembly, you need a

You will either need to get a BTX case (they are expensive and hard to find) or downgrade to an ATX motherboard which is *****ic since BTX is the new formfactor Snap the bracket onto the new drive. 1 drive 2 bracket rails (2) Gently slide the drive into place until you hear a click or feel the drive securely installed. Specifications for this item Brand Name Dell EAN 5711045440762 Is Recalled? H7283 Installing a Floppy Drive NOTE: In the event that the replacement or new floppy drive does not have shoulder screws, use the screws located within the drive-panel insert. 1 drive 2

The system's roomy interior offers easy access to the one free PCI slot and one free optical drive bay. Dell Blue Hard Drive Caddy NOTICE: To connect a network cable, first plug the cable into the network device and then plug the cable into the computer. The Intel boards obviously have front panel connectors, so I'm wondering if the front panel components of the E310 can be individually connected to the board by "unwiring" the panel wires Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents.

Our $988 (as of 3/23/06) test unit came with a TV tuner, a remote control, and a media-card reader; however, it lacked FireWire ports (for importing video from a camcorder) and Dell Optiplex 790 Hard Drive Caddy Log in with Facebook Log in with Twitter Log in with Google Your name or email address: Do you already have an account? It just doesn't look like it would be worth the time and expense to upgrade this particular model. Not ready to upgrade to a new computer yet, hoping to resolve this issue on the E310.

Dell Blue Hard Drive Caddy

Only unbuffered, non-ECC memory is supported. Rotate the heat sink and fan shroud assembly down towards the computer base and tighten the two capture screws. Dell R494d System Board CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide. Dell Optiplex Hard Drive Caddy Date: 12/09/2005 Views: 773 The face of the Dell Dimension E310 with the bezel removed.

Installing the Processor NOTICE: Ground yourself by touching an unpainted metal surface on the back of the computer. navigate here i know from first hand.. NOTICE: To connect a network cable, first plug the cable into the network wall jack and then plug the cable into the computer. Replacing the Drive Panel Follow the procedures in "Before You Begin." 1 drive panel 2 sliding plate 3 sliding plate lever Align the drive panel tabs with the side-door hinges. Yj221

Be sure that it has had sufficient time to cool before you touch it. I now have 2 GB RAM instead of the original 512 MB. Otherwise, your computer may not start properly. Check This Out I have since had a ATI Radeon X1300 card installed, which is working ok but the graphic quality isn't as good as the GeForce.

A useful setup poster is the only printed documentation. Dell Hard Drive Caddy Optiplex 7010 Please try again now or at a later time. But it arrived in good condition, and I was able to use the caddy to install a second hard drive in my Dell OptiPlex 3020 minitower computer.It is ridiculous that Dell

Buying this saved me the aggravation of calling them and jumping through hoops for them to ship me another one.This caddy is very easy to install, it snaps right onto the

Gently slide the drive (which should not yet be connected to the FlexBay cable) into place until you hear a click or feel the drive securely installed. Check all cable connections, and fold cables out of the way to provide airflow for the fan and cooling vents. Was this review helpful to you?YesNoReport abuse5.0 out of 5 starsHDD caddy trayByvmshopperon July 27, 2011Verified PurchaseI needed a caddy tray for the hard drive I wanted to install into my Dell Optiplex 9020 Hard Drive Caddy List unavailable.

Replace the screws attaching the system board. NOTE: This sliding plate secures and releases the drive panel and helps to secure the drives. Dell doesn't list them anywhere on their site and when I called they wanted $33 for a pair of refurbished brackets, which is ridiculous. this contact form Replacing the Power Supply CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.

I'm upgrading to get a PCIx16 slot so my son can get a better graphics card. It fits and works as promised.Too bad Dell has to have a proprietary caddy. Replace the computer cover. Proffitt Forum moderator / April 4, 2011 12:56 PM PDT In reply to: Issues with upgrading graphic card on Dell E310 The 8400 card was a problem unit.

Enter system setup and select the appropriate Drive option. No problem it fit fine. If you are not installing a processor upgrade kit from Dell, reuse the original heat sink when you install your new processor. Replacing the FlexBay or Optical Drive-Panel Insert 1 center drive-panel tab 2 drive-panel insert tab 3 drive panel 4 drive-panel insert latch 5 drive-panel insert Slide the drive-panel insert tab under

Replace the computer cover. NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain FCC certification of the computer. I may just leave it, I don't know. Dell has also trimmed the number of ports way down.

Leave the release lever extended in the release position so that the socket is ready for the new processor. Lol, not as hard as I figuered it would be. If you are replacing a card that is already installed in the computer, remove the card. thanks in advance.

Drives Your computer supports a combination of these devices: Up to two serial ATA hard drivesOne FlexBay drive (floppy drive or Media Card Reader)Up to two CD or DVD drives 1 Serial ATA hard drives should be connected to the connectors labeled "SATA0" or "SATA1" on the system board. check this links http://www.support.dell.com/support/edocs/systems/dim3100/en/sm/techov0.htm#wp1058089 http://www.support.dell.com/support/edocs/systems/dim3100/en/sm/specs0.htm#wp1052310 It is an intel 915 chipset mother board , the detailed specs are on the intel website Apr 26, 2006 #6 KingCody TS Evangelist Posts: Date: 12/09/2005 Views: 1709 Looking down inside of the Dell Dimension E310 at the motherboard and cooling equipment.

Replace the drive panel. Connect your computer and devices to their electrical outlets, and turn them on.