Home > Graphics Card > Troubleshooting Graphics Card

Troubleshooting Graphics Card


After changing the hard disk with a new one, you should notice this message: INSERT BOOT DEVICE... Sometimes the problem is caused by the motherboard. Once the "Read-only" box is unchecked you can change the AGP settings in the "AGP system configuration" area. You use these jumpers when you install the motherboard to configure static options such as processor speed or to enable infrequent actions such as updating the BIOS. http://divxeo.com/graphics-card/2gb-graphics-card-vs-4gb.html

The only different hardware is the motherboard and CPU.. I tried removing the card (I didn't have another to replace it with so I just left the AGP slot empty) and the computer acted the same way. The Fair Repair Act, or LB 67, is simple. I would appriciate any suggestion, cos I really need my computer. here

Troubleshooting Graphics Card

On my machine, SMARTGART sometimes refuses to change both the AGP speed and fast writes without rebooting after each individual change. I just bought a 400watt truepower antec for a AMD 3800+ X2 works flawless and is quieter than my last one. There is frequently a need to install and remove expansion cards when you work on a PC. Experienced ones first decide what is the most likely cause of the problem, what can be done to resolve it, in what order they should approach the repair, and what they'll

But on occasion, fiddling with your AGP port can cause your computer to hang or crash. If you have a sound card then the drivers can be downloaded from the web site of the company which made the card. No wonder surgeons occasionally get it wrong.Once you're sure you've located the right card, disconnect any external cables connected to it. Graphics Card Not Working Black Screen thats mostly likely the culprit.

The point of this exercise is to see if slowing down your AGP port can improve stability. Prime suspects: graphic drivers / card drow666Feb 25, 2012, 6:04 PM Hi everyone,for some time now, I've had trouble with my computer rebooting at seemingly random occasions. Now the monitor won't go out of standby at all when you start up the machine, although everything else seems to be starting up fine. Figure 2-5 shows the front-panel power LED cable already connected to the motherboard, and the female jack of the front-panel reset switch cable being seated against the male motherboard header-pin connector

We recommend you avoid round ribbon cables, and replace any you find in any of your systems with flat ribbon cables. Motherboard Chipset Drivers If you don't check the box, then AGP reverts to its old settings the next time your reboot. The exception is Ultra-ATA hard drive cables, which use 40-pin connectors with 80-wire cables. You may also be able to recognize a power supply problem by checking whether the voltages are in range.

Visual Artifacts Video Card

And it was set this way for more than a year when everything worked just fine, so I don't think that the source of the problem is there. If the stores are closed, the only cable you have uses pin/hole keying with a solid block that you can't get out, and you must connect that cable to a header-pin Troubleshooting Graphics Card Report DJ AKSHAY 266Posts Sunday December 21, 2008Registration date April 26, 2010 Last seen - Feb 5, 2009 at 09:49 AM Have you tried to reset the BIOS settings using the Video Card Problems Symptoms If the card has internal cables connected, disconnect those as well.

We haven't seen this sort of warning on a new card in years, but you may still encounter it if your system includes older cards. http://divxeo.com/graphics-card/how-to-fix-a-broken-graphics-card.html But when I switched on PC second time, PC beeps but beeps only three times. I did the CMOS reset. If you don't have a motherboard utility then you can try SpeedFan, SensorsView, or Motherboard Monitor. Graphics Card Troubleshooting Nvidia

As simple as that.. I was messing with something and I changed it right back after this. If there is a lot of dust in the heatsink then you can poke it out or blow it out with a can of compressed air. this contact form Remove the offending pin.¶ Sometimes you have no choice.

Not sure what the problem with card was, but the play time would vary between 1 hour to 4 hours + of game play. Graphics Card Stability Test Motherboard is ASUS P5B TMX/S. Also, even if a card physically fits a particular slot, a connector protruding from that card may interfere with another card, or there may not be enough room to route a

If you have an NVIDIA card, then you can try CoolBits or RivaTuner.

Harddisk not detected problem after restarting solved Cpu overheat, restart loop, RAM the cause? We have a chance to protect local repair jobs—the corner mom-and-pop repair shops that keep getting squeezed out by manufacturers. This can't happen if all connectors and cables are keyed, but many systems have at least some unkeyed connectors. Graphics Card Crashing When Playing Games Given RivaTuner's occasional problems adjusting AGP settings, it's a good idea to leave the box unchecked until you're sure that RivaTuner's settings are working.

I have tired all of your steps for trying to get the computer to boot with zero luck. All Rights Reserved Theme designed by Audentio Design. No beeps or clicks to hint at harddrive failure. navigate here If the PC won’t boot, realign the card and make sure all the connections are in place before trying to switch it on again.

November 14, 2008 Opening a PC Repair shop? Monitor works on different machiene so monitor is working. Report badladdad› DJ AKSHAY - Jul 10, 2009 at 08:00 AM my mother in law has a gate way and she was waiting on a game to load and the computer VGA video card outputs How to troubleshoot video card problems When a display adapter is having problems it can have all kinds of symptoms: crashes, hangs, freezes, graphics artifacts (display corruption),

Get the answer drow666Feb 25, 2012, 9:11 PM So if I understand that correctly, the absence of graphic driver somehow lowers the power demand of my graphic card and therefore the