Compaq Presario 700 Laptop Shut Down Problem
Also you can remove the heatsink and then remove the thermal grease and apply a new layer which also helps alleviate heat related issues. ________________________________________________________________________________________________________ I Love Kudos! I have exactly the same problem on my toshiba A60 after removing the onboard RAM chips. Hassle-free live chat software re-imagined for business growth. 2 users, always free. It has turned on a few times and when it turns on, i can do whatever with it, and it works flawlessly. http://divxeo.com/compaq-presario/compaq-presario-b1011-dvd-rom-drive-problem.html
i took both ram chips out, swapped tried each separte, no help. Remove the hard drive from the laptop and install it into the enclosure 3. However, this afternoon, the same thing happened again. Petr 0 LVL 1 Overall: Level 1 Message Author Closing Comment by:Sven Baehr ID: 330809592010-06-26 Both (rewarded) experts seem to be VERY experienced. http://h30434.www3.hp.com/t5/Notebook-Boot-and-Lockup/Compaq-Presario-C700-Shuts-Down-Frequently/td-p/466395
And i cant make them either. Wird verarbeitet... I checked all modules as best I could but found nothing loose. nelsonmcguy View Public Profile View LQ Blog View Review Entries View HCL Entries Find More Posts by nelsonmcguy 11-06-2009, 05:29 PM #15 exvor Senior Member Registered: Jul 2004 Location:
the flat cable connector on the top rear site of the lcd was half way out. Thanks for the links nonetheless. Star just below my nameIf you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly Reply 1 1 View 1 Replies .
I didn't see any posts that said if it happens to different models. AJZ 0 Discussion Starter muddybiker 10 Years Ago I have had a similar problem do to heat. Brittle solder is certainly bad, but I suspect your fan(s) are no longer running up to speed, in addition to dust build up in places where vacuuming and blowing cannot reach. http://www.techspot.com/community/topics/compaq-presario-700-laptop-shut-down-problem.100813/ You can sometimes use a can of air to blow out the dust, but on many systems that have a poor design you will not be able to remove the lint/dust
Posted On: 2 months ago . It raised the computer only 3/4" and solved the problem. I have to wait awhile for that to come back. but obviously since there are issues proving otherwise, ie known issues with HP/compaq equipment this may not always be the case. 0 LVL 23 Overall: Level 23 Laptops/Notebooks 12 Hardware
What do you guys/gals think the issue might be?
Thanks. I looked inside for any loose cables and think i put everything in properly. I used the disassembly instructions from Dell's support page to remove the screen, then remove and reseat the video cable.
View Related Posts . . navigate here If it still will not boot up, then one of three components is bad. If you can find any test memory, install it instead of your module and test if it makes any difference. they kept it for 2 and half weeks.
Just something to consider. Waste of money. That was my first experience when improperly plugged video cable prevented entire system from booting. Check This Out Nothing helped to start the laptop normally.
and so the reason it is not turning on is something else, which would make me an idiot. If you get no fan noise it is possible that the fan is not working at all. There is space between the bottom and a soft surface (the bed for example)My dad had this laptop for almost 3 years now and it's a big pain the butt: 1.
After all, it is the metal to metal contact between the mating surfaces that conducts most efficiently.
I honestly sitched out every switch out quick component hard drive memory you name this artice and this site saved me.. In Slackware however, the laptop consistently runs at 63-82 degrees Celsius while under no load. During this brief power-on period, the fan is running fast, as if the computer had become hot from having vents blocked. Back in the day compaq had a strange pratice of using f11.
Connect the enclosure to any other working computer via USB cable 4. Try upgrading/reflashing the BIOS. Any thoughts on what else this could mean? this contact form I took it to the Geek Squad and the guy there said that it probably was the motherboard and it needed to be sent to the Geek Squad Lab to have
New power switch, new power connector board, new power adapter. I’m not familiar with Alienware laptops. Compaq Presario 5000 Video Card Upgrade Im looking for +a new video card since i think that's the problem whenever i play any games the screen freezes up for 15 secs its a circa-2010`ISH is hp laptop likely a late 2009 model I would bet my next paycheque that the thermal paste is dried out andor the cooler is slightly warped and
If it is not very hot, then there is another issue. Take a hot air and apply 150 degrees C or just simply some heat on and near the chip and recline the board as the flux liquid will flow down under I then popped off the trim tab above the keyboard. As the joint fails, less and less power is able to be transmitted through it until none can be.
The fan whirs loudly in a pulse-like rhythm. i check DC adapter and connecter and both is ok, check a cooling sistem and work "fine". If anyone knows what it could be, please help. Salmon February 10, 2008 | I recently purchased an Alienware Aurora m7700 off eBay and was told ahead of time that that battery did not hold a charge.
it shut down. Take a soldering flux paste and push it next to one side of the chip. OneMoar said: ↑ andor the cooler is slightly warped and will need some copper shims or thermal padsClick to expand... Everything worked, and I backed up the past few days' work.
any sugguestions on what could be wrong or how to fix it? laptops do not come with cmos jumpers so removing cmos battery is the only option. I'm open to any suggestions. Any last minutes comments are welcome!!
Best regards, Mauricio 0 LVL 1 Overall: Level 1 Laptops/Notebooks 1 Message Assisted Solution by:Shef7 Shef7 earned 250 total points ID: 330781502010-06-25 Yes, it is delicate but it's not that